Stalking me has never been easier.
About Year: 2024
In the Summer of 2023 I decided to revamp my office and invest in video making equipment. I wasn’t exactly sure what my heading was – just that I wanted to experiment more with videos. Eventually this spawned into two projects – a weekly educational video, and a weekly podcast.
In this episode Shane invites Logan and Jake into his office to tell the story of the cultural phenomena “Migigan Tek”. We look at where some of the goofy graphics came to be, how it ended up on hundreds of shirts, and how the trend came to an end.
Click here to read more about "[LIMO 0006] The Story of Migigan Tek With Logan & Jake"...
In this session we head deeper into the cave – as Claden begins to feel a little different. After fighting an abolyth, we found ourselves deeper in the trap.
Click here to read more about "Claden’s Notes: Abolyth to Cage"...
I had a need to undo some Tri-Wing head screws. I did not have one of these bits and I wondered – perhaps I could 3D-Print one. It wouldn’t have to last forever – in fact if it only worked for 1 screw, that would be enough.
I was wondering if AC Power could be used as a timing reference in an embedded system. I realized that there were some things that likely used AC Power for timing – the example that came to my head was an outlet timer!
Click here to read more about "Video: AC Power as a Time Reference"...
We head into the cave that we may or may not be trapped in only to find more and more dangerous foes.
Click here to read more about "Claden’s Notes: Into the Ocean Cave"...
In this video I delve into the zero ohm resistor. Why would a resistor with no resistance be useful? Well – there are 3 reasons.
Click here to read more about "Video: The Zero Ohm Resistor"...
For this Christmas, I made my mother a small tray that could be used for decorative purposes. I made it with some scrap Aspen I had sitting around. I cut box joints, and then used the table saw to make a slight rabbit to facilitate the plywood base.
In this project I engrave a simple leaf pattern using my Shaper, and then I went over the engraving with a wood burner.
This year I named my new years resolution – “Create-52”. What’s it mean? Well – I want to build and nurture my habit of making, so I’m setting a goal to make and document something new every week.
Click here to read more about "2024 New Year’s Resolution"...
![[LIMO 0006] The Story of Migigan Tek With Logan & Jake](https://oberloier.com/wp-content/uploads/2023/11/LIMO_Dog.jpg)
